I‑Pro 1

Install. Protect. Check.

I‑Pro 1 is the first smart self-adap­tive seis­mic pro­tec­tion sys­tem for exist­ing build­ings. It’s suf­fi­cient to install I‑Pro 1 tech­nol­o­gy on the build­ing roof to iden­ti­fy the struc­ture and auto­mat­i­cal­ly pro­tect the con­struc­tion if an earth­quake occurs.

Why I‑Pro 1:
3 benefits + 1.

I‑Pro 1 rev­o­lu­tion­izes seis­mic pro­tec­tion with a smart tech­nol­o­gy that facil­i­tates and speeds up the work of struc­tur­al engi­neers and tech­ni­cians, mak­ing seis­mic safe­ty inter­ven­tions acces­si­ble to all with­out gen­er­at­ing dis­com­fort for own­ers, prop­er­ty man­agers and residents.

01

COST EFFICIENT

Tax deduc­tions.
Real Estate val­ue increasing.
Insur­ance pre­mi­um reduction.
Low main­te­nance costs.

02

LOW INSTALLATION TIME

Instal­la­tion times are sig­nif­i­cant­ly reduced when com­pared to oth­er anti-seis­mic solutions.

03

NON-INVASIVE INSTALLATION AND NO DISCOMFORT FOR RESIDENTS

Choos­ing I‑Pro 1 means that the build­ing does not have to be cleared: own­ers and inhab­i­tants can keep using the struc­ture dur­ing the I‑Pro 1 instal­la­tion. More­over, I‑Pro 1 does not alter the con­struc­tion archi­tec­ture and allows the avoid­ance of bur­den­some restora­tion works.

04

H24 STRUCTURE MONITORING

I‑Pro 1, thanks to its sen­sor sys­tem, records the build­ing move­ment 24 hours a day, allow­ing struc­tur­al mon­i­tor­ing. This is use­ful to iden­ti­fy anom­alies, pro­mote main­te­nance works and ease and speed up usabil­i­ty assess­ments after earthquakes.

I‑Pro 1 records the building’s movement and computes in real time the forces to provide to minimize structure oscillations and avoid a potential collapse.

Dur­ing a seis­mic event, I‑Pro 1 min­i­mizes the oscil­la­tions of the struc­ture by gen­er­at­ing forces on the build­ing roof; This leads to an incred­i­ble damp­en­ing effect. Thanks to the cen­tral­ized con­trol sys­tem, I‑Pro 1 records the build­ing’s move­ment by sen­sors mount­ed on its walls and com­putes in real time the forces need­ed to min­i­mize risks of dam­age or poten­tial collapse.

 

I‑Pro 1 pro­tects the build­ing dur­ing the seis­mic event, thanks to its iner­tial mass moved by the ISAAC con­trol algorithm.

I‑Pro 1 is the first plug and play device and self-adaptive technology.

The device auto­mat­i­cal­ly tunes the con­trol sys­tems and algo­rithms accord­ing to the struc­ture char­ac­ter­is­tics and the earth­quake intensity. 

I‑Pro 1 must only be installed on the roof of the build­ing to pro­tect the struc­ture when earth­quakes hap­pen. Once installed, I‑Pro 1 is able (thanks to a com­plex sys­tem of algo­rithms) to iden­ti­fy the build­ing struc­ture, acti­vate and reg­u­late in real­time the forces to min­i­mize risks of dam­age or poten­tial collapse.

dispositivo attivo per la protezione sismica

Enjoy maximum flexibility:
I‑Pro 1 is a one-fits-all-solution.

I‑Pro 1 is stan­dard in size and weight. Depend­ing on the build­ing char­ac­ter­is­tics and the seis­mic improve­ment required, it is suf­fi­cient to install a greater or less­er num­ber of devices to obtain the result desired.

 

I‑Pro 1 is per­fect for build­ings rein­forced con­crete or steel made.

WOULD YOU LIKE TO KNOW MORE ABOUT I‑PRO 1 TECHNOLOGY,
AND ITS APPLICATION?

Sign up and down­load l’ISAAC Doc about a con­crete structure.